Get in touch 0113 2491155

PVC Imperial Threaded 90 Degree Elbow - Male and Female Thread

PVC Imperial Threaded 90 Degree Elbow - Male and Female Thread

epco PVC Threaded 90 Degree Elbow - Male and Female Thread are made from the material unplasticised polyvinyl chloride. 

Our range of Imperial Threaded 90 Degree Elbow - Male and Female Thread pressure pipe fittings are available in sizes from 1/2” n.b. x 1/2" n.b. to 1” n.b. x 1” n.b.

Male and Female Threaded 90 Degree Elbows are used to connect two pipe fittings of the same diameter to form an angle of 90 degrees, with one end of the fitting male threaded and the other end female threaded. 

In order to do this correctly, please make sure you read the assembly and joining procedure guidelines in our technical information, ensuring you use the correct PTFE thread seal tape for bonding threaded pipe and fittings together. These can be found on our accessory products section.

Request that we contact you to discuss prices across our product range

Product Code Description and Size Dimensions (mm)
021.2683.02 1/2" X 1/2" PVC THREADED 90 DEGREE ELBOW MALE/FEMALE THEAD PN10 RATED
Z1 Z2 B C Wt(g)
20.5 20.5 16 16 24
021.2683.03 3/4" X 3/4" PVC THREADED 90 DEGREE ELBOW MALE/FEMALE THEAD PN10 RATED
Z1 Z2 B C Wt(g)
24.5 24.5 17 17 37
021.2683.04 1" X 1" PVC THREADED 90 DEGREE ELBOW MALE/FEMALE THEAD PN10 RATED
Z1 Z2 B C Wt(g)
30 30 21 21 67
  • Description
Description

Our PVC pressure pipe range is made from the material unplasticised polyvinyl chloride and subject to the system pressure, has a working temperature of +5°C to +60°C.

epco has one of the largest PVC pipe system ranges in the UK, with all PVC pipe and fittings within our range being fully matched and most carrying WRAS approval. 

Our PVC Imperial threaded pipe fitting products are available in sizes from 3/8” n.b. to 4” n.b. and subject to availability can generally be despatched from stock on a next day delivery service for orders placed before 5pm.

PVC is a lightweight pipe material which offers easy installation, a long service life and durability.

Unless otherwise stated our PVC threaded fittings range has the following pressure rating: 3/8” to 4” Class D / 12 bar (quoted at 20°C) and is manufactured in accordance with the standards: EN 1452-3, BS21, DIN2999, IS07.

Please contact us on 0113 2491155 or sales@epco-plastics.com for prices and more information.

Check All / Uncheck All

You currently have JavaScript disabled!

This site requires JavaScript to be enabled. Some functions of the site may not be usable or the site may not look correct until you enable JavaScript. You can enable JavaScript by following this tutorial. Once JavaScript is enabled, this message will be removed.