Get in touch 0113 2491155

PVC Imperial Reducing Tee

PVC Imperial Reducing Tee

epco PVC Reducing Tees are WRAS approved, made from the material unplasticised polyvinyl chloride. 

Our range of Imperial Reducing Tee pressure pipe fittings are available in sizes from 3/8” n.b. x 1/2" n.b. to 4" n.b. x 3” n.b.

Reducing Tees are a pipe fitting used to connect three pieces of pipe at an angle of 90 degrees, two of the same diameter and the other branched away from the larger pipe at a reduced diameter.

In order to do this correctly, please make sure you read the assembly and joining procedure guidelines in our technical information, ensuring you have the correct PVC solvent cement and cleaner intended for bonding pipe and fittings together. These can be found on our Imperial accessories section.
 

Request that we contact you to discuss prices across our product range

Product Code Description and Size Dimensions (mm)
021.081.0302 3/4" X 1/2" PVC REDUCING TEE
L L1 Z Z1 E E1 Wt(g)
19 16 14 14 33.5 28 42
021.081.0402 1" X 1/2" PVC REDUCING TEE
L L1 Z Z1 E E1 Wt(g)
22 16 17 17 42 28 69
021.081.0403 1" X 3/4" PVC REDUCING TEE
L L1 Z Z1 E E1 Wt(g)
22 19 17 17 42 34 70
021.081.0502 1 1/4" X 1/2" PVC REDUCING TEE
L L1 Z Z1 E E1 Wt(g)
26 16 21 21 51 38 112
021.081.0503 1 1/4" X 3/4" PVC REDUCING TEE
L L1 Z Z1 E E1 Wt(g)
26 19 21 21 51 34 115
021.081.0504 1 1/4" X 1" PVC REDUCING TEE
L L1 Z Z1 E E1 Wt(g)
26 22 21 21 51 42 118
021.081.0602 1 1/2" X 1/2" PVC REDUCING TEE
L L1 Z Z1 E E1 Wt(g)
31 16 26 26 61 28 155
021.081.0603 1 1/2" X 3/4" PVC REDUCING TEE
L L1 Z Z1 E E1 Wt(g)
31 19 26 26 61 34 166
021.081.0604 1 1/2" X 1" PVC REDUCING TEE
L L1 Z Z1 E E1 Wt(g)
31 22 26 26 61 42 170
021.081.0605 1 1/2" X 1 1/4" PVC REDUCING TEE
L L1 Z Z1 E E1 Wt(g)
31 26 26 26 61 51 178
021.081.0702 2" X 1/2" PVC REDUCING TEE
L L1 Z Z1 E E1 Wt(g)
38 16 33 33 75 28 268
021.081.0703 2" X 3/4" PVC REDUCING TEE
L L1 Z Z1 E E1 Wt(g)
38 19 33 33 75 34 270
021.081.0704 2" X 1" PVC REDUCING TEE
L L1 Z Z1 E E1 Wt(g)
38 22 33 33 75 42 275
021.081.0705 2" X 1 1/4" PVC REDUCING TEE
L L1 Z Z1 E E1 Wt(g)
38 26 33 33 75 51 288
021.081.0706 2" X 1 1/2" PVC REDUCING TEE
L L1 Z Z1 E E1 Wt(g)
38 31 33 33 75 61 300
021.081.0804 2 1/2" X 1" PVC REDUCING TEE
L L1 Z Z1 E E1 Wt(g)
44 22 39 39 89 42 463
021.081.0805 2 1/2" X 1 1/4" PVC REDUCING TEE
L L1 Z Z1 E E1 Wt(g)
44 26 39 39 89 51 465
021.081.0806 2 1/2" X 1 1/2" PVC REDUCING TEE
L L1 Z Z1 E E1 Wt(g)
44 31 39 39 89 61 465
021.081.0807 2 1/2" X 2" PVC REDUCING TEE
L L1 Z Z1 E E1 Wt(g)
44 38 39 39 89 75 478
021.081.0905 3" X 1 1/4" PVC REDUCING TEE
L L1 Z Z1 E E1 Wt(g)
51 26 47 47 106 51 702
021.081.0906 3" X 1 1/2" PVC REDUCING TEE
L L1 Z Z1 E E1 Wt(g)
51 31 47 47 106 61 740
021.081.0907 3" X 2" PVC REDUCING TEE
L L1 Z Z1 E E1 Wt(g)
51 38 47 47 106 75 740
021.081.0908 3" X 2 1/2" PVC REDUCING TEE
L L1 Z Z1 E E1 Wt(g)
51 44 47 47 106 89 760
021.081.1006 4" X 1 1/2" PVC REDUCING TEE
L L1 Z Z1 E E1 Wt(g)
61 31 57 57 129 61 1250
021.081.1007 4" X 2" PVC REDUCING TEE
L L1 Z Z1 E E1 Wt(g)
61 38 57 57 129 75 1200
021.081.1008 4" X 2 1/2" PVC REDUCING TEE
L L1 Z Z1 E E1 Wt(g)
61 44 57 57 129 89 1220
021.081.1009 4" X 3" PVC REDUCING TEE
L L1 Z Z1 E E1 Wt(g)
61 51 57 57 129 106 1250
  • Description
Description

Our PVC pressure pipe range is made from the material unplasticised polyvinyl chloride and subject to the system pressure, has a working temperature of +5°C to +60°C. 

epco has one of the largest PVC pipe system ranges in the UK, with all PVC pipe and fittings within our range being fully matched and most carrying WRAS approval.  

Our PVC Imperial plain pipe fitting products are available in sizes from 3/8” n.b. to 10" n.b. and subject to availability can generally be despatched from stock on a next day delivery service for orders placed before 5pm. 

PVC is a lightweight pipe material which offers easy installation, a long service life and durability. 

Unless otherwise stated our PVC plain fittings range has the following pressure rating: Solvent Weld 3/8” n.b. to 6” n.b. Class E / 15 bar, 8" n.b and 10" n.b. Class C / 9 bar (both quoted at +20°C) and is manufactured in accordance with the standard: EN 1452-3.

Please contact us on 0113 2491155 or sales@epco-plastics.com for prices and more information.

Check All / Uncheck All

You currently have JavaScript disabled!

This site requires JavaScript to be enabled. Some functions of the site may not be usable or the site may not look correct until you enable JavaScript. You can enable JavaScript by following this tutorial. Once JavaScript is enabled, this message will be removed.