Get in touch 0113 2491155

ABS Plain Cap

ABS Plain Cap

epco ABS Plain Caps are WRAS approved, made from the material acrylonitrile butadiene styrene material. 

Our range of Imperial Plain Cap pressure pipe fittings are available in sizes from 1/2" n.b. to 8” n.b.

Caps are used to seal the end of a length of ABS pipe which is of the same diameter.

In order to do this correctly, please make sure you read the assembly and joining procedure guidelines in our technical information, ensuring you have the correct ABS solvent cement and cleaner intended for bonding pipe and fittings together. These can be found on our Imperial accessories section. 
 

Request that we contact you to discuss prices across our product range

Product Code Description and Size Dimensions (mm)
011.221.02 1/2" ABS CAP
L E H Wt(g)
16 28 27 8
011.221.03 3/4" ABS CAP
L E H Wt(g)
19 33 31 12
011.221.04 1" ABS CAP
L E H Wt(g)
22 41 36 20
011.221.05 1 1/4" ABS CAP
L E H Wt(g)
26 50 43 30
011.221.06 1 1/2" ABS CAP
L E H Wt(g)
31 60.5 49 55
011.221.07 2" ABS CAP
L E H Wt(g)
38 75 57 96
011.221.08 2 1/2" ABS CAP
L E H Wt(g)
44 89 67 133
011.221.09 3" ABS CAP
L E H Wt(g)
51 106 80 228
011.221.10 4" ABS CAP
L E H Wt(g)
61 129 95 390
011.221.11 5" ABS CAP
L E H Wt(g)
76 161 114 713
011.221.12 6" ABS CAP
L E H Wt(g)
86 181 126 1021
011.221.13 8" ABS CAP
L E H Wt(g)
119 258 145 2615
  • Description
Description

Our ABS pressure pipe range is made from the material acrylonitrile butadiene styrene and subject to the system pressure, has a working temperature of -40°C to +70°C. 

epco has one of the largest ABS pipe system ranges in the UK, with all ABS pipe and fittings within our range being fully matched and all carrying WRAS approval.  

Our ABS Imperial plain pipe fitting products are available in sizes from 1/2” n.b. to 8” n.b. and subject to availability can generally be despatched from stock on a next day delivery service for orders placed before 5pm. 

ABS is extremely durable and abrasion resistant, with a smooth bore for optimum flow and a long operating life. 

Unless otherwise stated our ABS plain fittings range has the following pressure rating: Solvent Weld 1/2” n.b. to 6” n.b. Class E / 15 bar, 8" n.b. Class C / 9 bar (both quoted at +20°C) and is manufactured in accordance with the standard: BS5392 Part 1. 

Check All / Uncheck All

You currently have JavaScript disabled!

This site requires JavaScript to be enabled. Some functions of the site may not be usable or the site may not look correct until you enable JavaScript. You can enable JavaScript by following this tutorial. Once JavaScript is enabled, this message will be removed.