Get in touch 0113 2491155

ABS Plain 90 Degree Short Radius Bend

ABS Plain 90 Degree Short Radius Bend

epco ABS Plain 90 Degree Short Radius Bends are WRAS approved, made from the material acrylonitrile butadiene styrene. 

Our range of Imperial Plain 90 Degree Short Radius Bend pressure pipe fittings are available in sizes from 1/2” n.b. to 4" n.b.

90 Degree Short Radius Bends are a pipe fitting used to connect two pieces of pipe of the same diameter at an angle of 90 degrees with a gradual curve for a smooth flow.

In order to do this correctly, please make sure you read the assembly and joining procedure guidelines in our technical information, ensuring you have the correct ABS solvent cement and cleaner intended for bonding pipe and fittings together. These can be found on our ABS Imperial accessories section. 
 

Request that we contact you to discuss prices across our product range

Product Code Description and Size Dimensions (mm)
011.051.02 1/2" ABS 90 DEGREE S/R BEND
L Z E Wt(g)
16 40 28 30
011.051.03 3/4" ABS 90 DEGREE S/R BEND
L Z E Wt(g)
19 50 35 45
011.051.04 1" ABS 90 DEGREE S/R BEND
L Z E Wt(g)
22 64 42 90
011.051.05 1 1/4" ABS 90 DEGREE S/R BEND
L Z E Wt(g)
26 80 51 138
011.051.06 1 1/2" ABS 90 DEGREE S/R BEND
L Z E Wt(g)
31 100 63 245
011.051.07 2" ABS 90 DEGREE S/R BEND
L Z E Wt(g)
38 126 77 410
011.051.08 2 1/2" ABS 90 DEGREE S/R BEND
L Z E Wt(g)
44 150 94 780
011.051.09 3" ABS 90 DEGREE S/R BEND
L Z E Wt(g)
51 180 113 1220
011.051.10 4" ABS 90 DEGREE S/R BEND
L Z E Wt(g)
61 220 132 2030
  • Description
Description

Our ABS pressure pipe range is made from the material acrylonitrile butadiene styrene and subject to the system pressure, has a working temperature of -40°C to +70°C. 

epco has one of the largest ABS pipe system ranges in the UK, with all ABS pipe and fittings within our range being fully matched and all carrying WRAS approval.  

Our ABS Imperial plain pipe fitting products are available in sizes from 1/2” n.b. to 8” n.b. and subject to availability can generally be despatched from stock on a next day delivery service for orders placed before 5pm. 

ABS is extremely durable and abrasion resistant, with a smooth bore for optimum flow and a long operating life. 

Unless otherwise stated our ABS plain fittings range has the following pressure rating: Solvent Weld 1/2” n.b. to 6” n.b. Class E / 15 bar, 8" n.b. Class C / 9 bar (both quoted at +20°C) and is manufactured in accordance with the standard: BS5392 Part 1. 

Check All / Uncheck All

You currently have JavaScript disabled!

This site requires JavaScript to be enabled. Some functions of the site may not be usable or the site may not look correct until you enable JavaScript. You can enable JavaScript by following this tutorial. Once JavaScript is enabled, this message will be removed.