Get in touch 0113 2491155

ABS Blank Flange - D&E

ABS Blank Flange - D&E

epco ABS Blank Flange - D&E are made from the material acrylonitrile butadiene styrene. 

Our range of Imperial Plain Blank Flange - D&E pressure pipe fittings are available in sizes from 1/2" n.b. to 6” n.b.

Blank Flanges are used to create a seal at the end of a length of pipe of the same diameter, with the use of a stub or full face flange with two backing rings, a stub gasket and fastener set.

In order to do this correctly, please make sure you read the assembly and joining procedure guidelines in our technical information, ensuring you have the correct ABS solvent cement and cleaner intended for bonding pipe and fittings together. These can be found on our accessory products section. 

Request that we contact you to discuss prices across our product range

Product Code Description and Size Dimensions (mm)
011.161.02W 1/2" ABS BLANK FLANGE TABLE D/E
E S I Wt(g) Holes
95 11 67 75 4
011.161.03W 3/4" ABS BLANK FLANGE TABLE D/E
E S I Wt(g) Holes
105 12 73 100 4
011.161.04W 1" ABS BLANK FLANGE TABLE D/E
E S I Wt(g) Holes
115 14 83 137 4
011.161.05W 1 1/4" ABS BLANK FLANGE TABLE D/E
E S I Wt(g) Holes
142 15 88 225 4
011.161.06W 1 1/2" ABS BLANK FLANGE TABLE D/E
E S I Wt(g) Holes
152 16 98 280 4
011.161.07W 2" ABS BLANK FLANGE TABLE D/E
E S I Wt(g) Holes
165 18 115 355 4
011.161.09W 3" ABS BLANK FLANGE TABLE D/E
E S I Wt(g) Holes
200 20 146 640 4
011.161.10V 4" ABS BLANK FLANGE TABLE D
E S I Wt(g) Holes
220 22 178 825 4
011.161.10W 4" ABS BLANK FLANGE TABLE E
E S I Wt(g) Holes
220 22 178 825 8
011.161.12W 6" ABS BLANK FLANGE TABLE D/E
E S I Wt(g) Holes
283 28 235 1589 8
  • Description
Description

Our ABS pressure pipe range is made from the material acrylonitrile butadiene styrene and subject to the system pressure, has a working temperature of -40°C to +70°C. 

epco has one of the largest ABS pipe system ranges in the UK, with all ABS pipe and fittings within our range being fully matched and all carrying WRAS approval.  

Our ABS Imperial plain pipe fitting products are available in sizes from 1/2” n.b. to 8” n.b. and subject to availability can generally be despatched from stock on a next day delivery service for orders placed before 5pm. 

ABS is extremely durable and abrasion resistant, with a smooth bore for optimum flow and a long operating life. 

Unless otherwise stated our ABS plain fittings range has the following pressure rating: Solvent Weld 1/2” n.b. to 6” n.b. Class E / 15 bar, 8" n.b. Class C / 9 bar (both quoted at +20°C) and is manufactured in accordance with the standard: BS5392 Part 1. 

Check All / Uncheck All

You currently have JavaScript disabled!

This site requires JavaScript to be enabled. Some functions of the site may not be usable or the site may not look correct until you enable JavaScript. You can enable JavaScript by following this tutorial. Once JavaScript is enabled, this message will be removed.